MY HOLLAND LOPS  |  SHOWING RABBITS  |  RABBIT GENETICS  |  FOR BREEDERS  |  BLOG  |   RABBIT STORE

Wire Mesh to Cut for 1 6-foot Cage With Three 24" x 24" Compartments.

Floor with baby guards:  Cut one piece of your floor mesh (either ½” x ½” or ½” x 1”) that is 78 inches long and 30 inches wide.  From each corner, remove a 3” square.

Interior baby guards:  Cut two pieces of your floor mesh 24” x 3”. 

End walls and Divider Walls:  Cut four pieces of wall mesh 24” x 16”. 

Front and Back:  Cut two pieces of wall mesh 72” x 16”. 

Top:  Cut one piece of wall mesh 72” x 24”. 

Doors and Door Reinforcement:  Cut three pieces of wall mesh 12” x 14” and three pieces 4” x 14”.

Optional Hay Rack:  Cut three pieces of wall mesh 14” x 10” (use the 1” direction for the 14-inch dimension because you will bend at the 3” mark) and three pieces of wall mesh 3” x 8”.

Contact Me    Privacy Statement    Links Index   Site Map