Rabbit Hanging Cage Wire Cutting Guide Brought to you by www.thenaturetrail.com Wire Mesh to Cut for 1 6-foot Cage With Three 24" x 24" Compartments. Floor with baby guards: Cut one piece of your floor mesh (either ½” x ½” or ½” x 1”) that is 78 inches long and 30 inches wide. From each corner, remove a 3” square. Interior baby guards: Cut two pieces of your floor mesh 24” x 3”. End walls and Divider Walls: Cut four pieces of wall mesh 24” x 16”. Front and Back: Cut two pieces of wall mesh 72” x 16”. Top: Cut one piece of wall mesh 72” x 24”. Doors and Door Reinforcement: Cut three pieces of wall mesh 12” x 14” and three pieces 4” x 14”. Optional Hay Rack: Cut three pieces of wall mesh 14” x 10” (use the 1” direction for the 14-inch dimension because you will bend at the 3” mark) and three pieces of wall mesh 3” x 8”.